# USS Voyager / NCC-74656 Detailed Starship + Display Stand

Stylised 3D-printable desktop display model generated for Sott. This is a Voyager-inspired display model, not a screen-accurate licensed replica.

## Print files

- `ncc_74656_voyager_DETAILED_PRINT.stl` — print this as the detailed Voyager-style ship.
- `ncc_74656_voyager_stand_DETAILED_PRINT.stl` — print this as the labelled stand.
- `ncc_74656_voyager_assembly_REFERENCE.stl` — visual/reference only; do not use as the normal print file.

## Detail included

- Voyager-style arrow/teardrop primary hull.
- Revised v2.1 integrated nose: blended tapered ellipsoid chain instead of the earlier crude wedge/block nose.
- Integrated engineering hull.
- Raised primary-hull panel/ring layers.
- Raised `NCC-74656` and `VOYAGER` block text on top of the hull.
- Window/detail shoulder strips.
- Deflector nose/button detail.
- Engineering hull ribbing and aft shuttle-bay-style detail.
- Swept variable-geometry-style pylons.
- Raised nacelle ribs/grilles, side strip detail, and bussard caps.
- Labelled display stand with `USS VOYAGER` and `NCC-74656`.

## Dimensions

- Ship: approx 108 × 167 × 29 mm
- Stand: approx 118 × 74 × 73 mm

## Material / slicing assumption

PLA first print. PETG optional for a tougher stand.

For AD5X / 0.4 mm PLA as a starting point:

- Layer height: 0.16 mm for detail, 0.20 mm for speed.
- Walls: 3.
- Top/bottom: 4–5 layers.
- Infill: 10–15% ship, 15–25% stand.
- Supports: likely needed under nacelles/pylons and lower hull transitions. Use organic/tree supports where possible.
- Brim: optional for the ship, useful for the stand if adhesion is marginal.

## Verification

Generated and reloaded with `trimesh`/`manifold3d`.

- Ship STL: watertight, 1 connected component.
- Stand STL: watertight, 1 connected component.
- Assembly reference STL: watertight, 2 components as expected.